|
TEG1109P-8-102W is the gigabit unmanaged lightning protection switch which is Tenda specifically developed for requirement of building Gigabit WLAN and HD camera monitor network.With high-performance access, 9-10/100/1000M Base-T Ethernet RJ45 ports; 6KV lightning-proof for all port; every single port support MDI/MDIX and wired speed; PoE ports supports IEEE802.3at/af standard while detecting and recognizing the IEEE802.3at/af standard power device automatically. Through conventional Cat 5e twisted-pair cable, power can be transmitted along with data for AP, IP Camera and IP Phone. With PoE dynamic power, easierconfigure, flexible extend network without being limited by the power line layout, plug and play, helping SMB,hotel, shopping mall,school to build high-security and reliability network of wireless cover and HD monitor.
Standard&ProtocolIEEE 802.3? IEEE 802.3u?IEEE 802.3ab?IEEE 802.3x?IEEE 802.3af?IEEE 802.3at
MTBF=50,000 hours(about 5 years)
IndicatorLink/Act, Power
exchange capacity18 Gbps
Packet Forwarding Rate13.39Mpps
Fixed Port8 10/100/1000Mbps RJ45 Ports(Data/PoE)
1 10/100/1000Mbps RJ45 Ports(Data)
(Auto Negotiation/Auto MDI/MDIX)
CapacityWire-speed forwarding:Support
Forwarding mode:Store-forward and cut-through
Mac Address Table:16K
PoE SupplyPort 1 to Port 8 support standard IEEE802.3at/af power( maximum power for each port is 30W), PoE power type is end-span(12+, 36- line pair)
Dimension177.5mm*104mm*26mm(W × D × H)
Input VoltageAC:100-240V~ 50/60Hz
DC:51V /2.0A (Power Adapter Output )
Power Consumptionin full configuration:<102W
PoE Power Supply :<92W
EnvironmentOperating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
|
